Climbing Systems
This system takes the effort out of climbing and canopy entry. Utilizing left and right hand ascenders and foot stirrups, you can ascend in less time and almost "walk up" your rope.
Kit Includes:
• 1- LH CT Hand Ascender
• 1- RH CT Hand Ascender
• 3- "D" shape triple locking carabiners
• 2 foot stirrups
This new design improves on the already ingenious HAAS® Ascent System by giving you an additional 18" of bungee in the system for a total of 30".
FEATURES:
• Double tube system allows 30" of in-line bungee to be contained within the unit for over 30" of elongation
• Versatile ascent system has zero set up and can be used by multiple users without adjustment
• Snap is tied just above the ascender, extracting out up to 30" to eliminate any set up as well as any "dead spots" in the return action
• Designed to maximize friction reduction with a bungee that terminates at the top of the Velox, travels down the channel to the bottom where it wraps around a shiv with stainless steel sealed bearings inside a machined aluminum block
• Bungee returns up a second channel where it is tied to a snap
• Bungee is replaceable in under five minutes with no tools
The Singing Tree Rope Wrench is a friction device that allows the climber to ascend, descend and work the tree "Single Rope" with a friction hitch.
The ISC RP280 is the next step in the evolution of SRT work positioning. The sleeker design and rounded aluminum sideplates allow for less potential for damage to the climbers line and the set screw on the back pin allows for quick changeover betweendesired tethers.
It works by using leverage to force the rope into an S shape and providing friction for a controlled descent. When engaged, the Rope Wrench acts much like a conventional descent device such as a Figure eight.
When not engaged, the Rope Wrench provides no interference with ascending the rope. This allows the climber to work an entire tree using Single Rope Technique. Tethers for wrench sold separately.
The ISC Rope Wrench is a friction device that allows the climber to ascend, descend and work the tree "Single Rope" with a friction hitch. (Shown with stiff tether.)
The ISC RP280 is the next step in the evolution of SRT work positioning. The sleeker design and rounded aluminum sideplates allow for less potential for damage to the climbers line and the set screw on the back pin allows for quick changeover betweendesired tethers.
It works by using leverage to force the rope into an S shape and providing friction for a controlled descent. When engaged, the Rope Wrench acts much like a conventional descent device such as a Figure eight.
When not engaged, the Rope Wrench provides no interference with ascending the rope. This allows the climber to work an entire tree using Single Rope Technique.
The ISC Rope Wrench is a friction device that allows the climber to ascend, descend and work the tree "Single Rope" with a friction hitch. (Shown with double tether.)
The ISC RP280 is the next step in the evolution of SRT work positioning. The sleeker design and rounded aluminum sideplates allow for less potential for damage to the climbers line and the set screw on the back pin allows for quick changeover betweendesired tethers.
It works by using leverage to force the rope into an S shape and providing friction for a controlled descent. When engaged, the Rope Wrench acts much like a conventional descent device such as a Figure eight.
When not engaged, the Rope Wrench provides no interference with ascending the rope. This allows the climber to work an entire tree using Single Rope Technique.
The new Rope Wrench with Squirrel Tether is manufactured from aluminium, which ensures that twist and flex in the Rope Wrench system, is minimal. This means that the Rope Wrench remains in the optimal low friction position during ascent, (allowing the climber to achieve maximum climb efficiency), and ensures that the Wrench engages efficiently, as required during lateral movements and descent.
It works by using leverage to force the rope into an S shape and providing friction for a controlled descent. When engaged, the Rope Wrench acts much like a conventional descent device such as a Figure eight.
When not engaged, the Rope Wrench provides no interference with ascending the rope. This allows the climber to work an entire tree using Single Rope Technique.
Limited edition of the Notch Rope Runner Pro that is the ultimate SRT mechanical device.
This single rope mechanical device makes SRT ascending easier, allowing ascent and descent on a single line without bending the rope. It also allows users to use a foot ascender with this 100% mechanical device.
FEATURES:
• Incredibly easy SRT or DRT climbing
• Unparalleled smooth one-hand descent
• Fully mid-line attachable (stays in one piece!)
• Rope friendly edges
• Flattened 'bird' sections for comfort when descending
• Multiple friction settings
• Integrated central tending point for attachment to a chest harness
• Improved sealed ball bearing pulley
• Internal spring keeps it safe from dirt and debris
• Slic pins keep all of the parts together when the device is opened
Limited edition of the Notch Rope Runner Pro that is the ultimate SRT mechanical device.
This single rope mechanical device makes SRT ascending easier, allowing ascent and descent on a single line without bending the rope. It also allows users to use a foot ascender with this 100% mechanical device.
FEATURES:
• Incredibly easy SRT or DRT climbing
• Unparalleled smooth one-hand descent
• Fully mid-line attachable (stays in one piece!)
• Rope friendly edges
• Flattened 'bird' sections for comfort when descending
• Multiple friction settings
• Integrated central tending point for attachment to a chest harness
• Improved sealed ball bearing pulley
• Internal spring keeps it safe from dirt and debris
• Slic pins keep all of the parts together when the device is opened
The KNEE ASCENT LOOP assembly facilitates the arborist's ascent when using the ZIGZAG or ZIGZAG PLUS mechanical Prusik on a single rope. It contains an upper strap, a CROLL L rope clamp, a lower strap with foot loop and an XS size TOOLBAG tool pouch. The system is entirely adjustable and adapts to all shapes and sizes.
Go to the Petzl You Tube video here for more information: https://youtu.be/TWF3-cyhH8g
The new ISC Squirrel Tether is manufactured from Aluminium, which ensures that twist and flex in the Rope Wrench system, is minimal. This means that the Rope Wrench remains in the optimal low friction position during ascent, (allowing the climber to achieve maximum climb efficiency), and ensures that the Wrench engages efficiently, as required during lateral movements and descent.
The Squirrel Tether can be used with an SRT Chest Harness, for hands-free tending of the system, while ascending. The Squirrel offers a choice of four SRT Chest Harness attachment points, allowing users to position their harness, according to the type of chest harness used- and to their personal preference.
The secondary aperture of the Squirrel Pulley provides an attachment point for the addition of a secondary system, which means that the Squirrel system can be used for rescues.
The Squirrel can be used with the 11-13mm Rope Wrench (RP280) and /or the new 13mm-optimized Rope Wrench (RP283).
.jpg)
.jpg)