New Products
These products are new additions to the site and can also be found under their regular categories.
Small Throw Line Storage Bag - 08-07140-RD
150' Polyethylene Throw Line - 08-98025
14 oz Blaze Orange Throw Weight - 08-98319-BO
• Hot forged side plates for maximum strength and durability
• Highly efficient sealed ball bearings
• Stout side plates to better tend hitches
• Riveted and tamperproof assembly
• Well suited for MRS climbing systems, lanyards, and more
Compare to the DMM Hitchclimber.
The new geometry offers greater efficiency combined with a striking aesthetic. The ‘pushing plates’ will advance your friction hitch earlier and the optimized fair lead flairs direct rope towards the sheave when tending slack.
Also features a large sheave with an efficient roller bearing and a stainless steel axle.
Bolstered connection areas lead to high configured strengths. The newly developed side plates combined with the axle construction means a hugely increased MBS to 40kN. The side plates boast increased fairleads and tuned angles for more efficient prusik minding. This Beckett version has a connector hole for rope or carabiner attachment.
New for 2023! Introducing Climb Right’s latest aluminum climber, the Honey Badger Climber. Designed, machined, and assembled in the USA. Honey Badger Climbers feature lightweight contoured cuffs and climber shanks made of aluminum. Shipped fully assembled.
Honey Badger Climbers start with USA made 7075 aerospace-grade aluminum formed into ergonomically shaped “J” hooks. The cuff is also made from aerospace-grade aluminum for maximum support of the lower leg. The aluminum blanks are formed to the basic contour of your calf for your comfort.
Vinyl-wrapped for style, the cuff is height adjustable 16” to 20” and angle adjustable at 7° or 10°. The washable and replaceable foam pads feature molded construction with ventilation channels for air circulation. 86 square inches of surface area offers maximum comfort and support. Hook and loop fastening upper straps offer infinite and easy adjustment for a comfortable and snug fit. 4” wide for comfort and support.
The lower straps feature Climb Right’s rounded-edged ring. Rounded edges mean no sharp edges to cause excessive wear on the hooks. Straps are weather-resistant and stretch resistant coated webbing. Our world-sourced gaffs are flame hardened for strength and durability. These forged gaffs are held in place by two screws for quick change with the included Allen wrenches. Includes leather gaff guards to protect your gaffs.
A Honey Badger exclusive feature is the integrated tool pouch in the upper strap. No more searching for your Allen wrenches, as they are easily reachable, tucked into the upper strap. This makes our “Quick Change” gaffs Quicker Change gaffs!
Maximum allowable weight of user and gear is 350 lbs.
Ergo climbers, the replacement for the Notch Gecko steel climbers are thoughtfully designed and 100% focused on comfort. An ergonomic lightweight shank provides a more natural foot angle to prevent pressure points and fatigue so your feet don’t hurt at the end of the day. The adjustable cuff allows you to fit the comfortable foam pad on the correct spot on your leg to help disperse pressure and prevent pain in your shins
The new dual buckle system offers improved stability and allows you to use them with a wider variety of climbing boots. Once you set the heel to your preferred position, just tighten the instep strap to keep your foot securely in place. Only having to tighten and loosen the instep strap makes it easy to get the climbers off and on quickly.
FEATURES:
• Adjustable cuff for improved comfort
• Ergonomic shank for a more natural foot angle
• Redesigned cuff better disperses pressure, won’t slip out of place, and reduces discomfort on the shins
• Dual Foot Strap Assembly makes it easy to fit to your boots. The rear strap can be set and left for comfort and convenience
• Stirrup grip pad for increased grip and stability
• Scannable enabled for track and trace capability
The Portwest A350 is an excellent all-around work glove with great dexterity.
FEATURES:
• Maximum dexterity
• Protects against oil in warm and humid conditions
• PU/Nitrile blended foam coating for excellent grip in wet and dry conditions
• Palm dipped to increase dexterity and ventilation
• 100% Breathable seamless liner
• Color: Gray/Black
• ANSI/ISEA 105 - 2016, Cut Level A1
• Abrasion Level A4 & Oil Resistant
The Portwest A350 is an excellent all-around work glove with great dexterity.
FEATURES:
• Maximum dexterity
• Protects against oil in warm and humid conditions
• PU/Nitrile blended foam coating for excellent grip in wet and dry conditions
• Palm dipped to increase dexterity and ventilation
• 100% Breathable seamless liner
• Color: Gray/Black
• ANSI/ISEA 105 - 2016, Cut Level A1
• Abrasion Level A4 & Oil Resistant
The Portwest A350 is an excellent all-around work glove offering great dexterity.
FEATURES:
• Maximum dexterity
• Protects against oil in warm and humid conditions
• PU/Nitrile blended foam coating for excellent grip in wet and dry conditions
• Palm dipped to increase dexterity and ventilation
• 100% Breathable seamless liner
• Color: Gray/Black
• ANSI/ISEA 105 - 2016, Cut Level A1
• Abrasion Level A4 & Oil Resistant
The Portwest A350 is an excellent all-around work glove with great dexterity.
FEATURES:
• Maximum dexterity
• Protects against oil in warm and humid conditions
• PU/Nitrile blended foam coating for excellent grip in wet and dry conditions
• Palm dipped to increase dexterity and ventilation
• 100% Breathable seamless liner
• Color: Gray/Black
• ANSI/ISEA 105 - 2016, Cut Level A1
• Abrasion Level A4 & Oil Resistant
SPECIAL ORDER-ALLOW 5-7 DAYS TO SHIP
This new winch is equipped with a centrifugal clutch un-like the PCW5000. As a result, the drum does not immediately start turning at the start of the engine. After having done a few wraps of rope on the drum, all that is left to do is to insert it in the cam cleat, pass it on the exit guide and pull on it when the time comes. This action then engages the centrifugal clutch and the winch starts pulling.
As soon as the tension on the rope is released, the drum stops turning and the anti rollback mechanism does its job by holding the load in position. To free the rope, a simple lateral movement is needed. This gives the user perfect control throughout the pulling operation.
This model also features the most recent Honda GX50 4-stroke 360° inclinable engine. Among its other numerous characteristics, note the smooth performance, proven reliability, emissions compliant, and ease of start-up, of operation and maintenance. Users will therefore have the freedom to use this winch in any conditions and any positions.
Polyester sling - 2-1/2'' x 6-1/2' included.
Ships within 5 days
Safe working load 400 lbs. (181 kg) and weighs only 24 lbs. (11 kg) with battery.
This powerful tool has revolutionized safety and injury prevention in the workplace, by removing the physical strain and fatigue of climbing. The Ronin Lift battery-powered power ascender is an affordable tool that every at-height worker should have in their tool kit.
Ronin Lift was developed to manage heavy loads in tough environments to help perform the task at hand. Even though it is one of the lightest machines on the market, it’s smooth, fast, and easy to use. Ronin Lift maintains controlled acceleration through its variable-speed thumbwheel up to the maximum safe working load of 400 lbs. (181 kg).
Ronin Lift versatility allows the use of mechanical advantages up to 3:1, which means loads of up to 1200 lbs. (544 kg) can be accommodated. Both Ronin Lift anchor points are rated at 5,000 lbs. for confident rigging.
Kit includes: Ronin Ascender, 28V Battery, Charger. Wire-less Remote, Rope Brush, Rubber Motor Protector, Perfect Burn Tip and Hard Carrying Case.
Recommended ropes we stock are: Yale Blue Moon, Yale XTC Blaze, and Teufelberger X-Static.
PROTOS – from ancient Greek, THE FIRST – is the first integral protective helmet of its kind. The more than 12 year development process aimed at integrating ear, face and neck protection, with a chinstrap and rear ventilation between the inner and outer shell.
• Fits perfectly even when working in sloping or overhead positions
• Hearing and face protection are integrated into the shell of the head protection to prevent snagging on branches
• Allows the cooling air to flow in from all sides and to escape through the ventilation gate
• Can be adjusted with only two fingers
PROTOS – from ancient Greek, THE FIRST – is the first integral protective helmet of its kind. The more than 12 year development process aimed at integrating ear, face and neck protection, with a chinstrap and rear ventilation between the inner and outer shell.
• Fits perfectly even when working in sloping or overhead positions
• Hearing and face protection are integrated into the shell of the head protection to prevent snagging on branches
• Allows the cooling air to flow in from all sides and to escape through the ventilation gate
• Can be adjusted with only two fingers
PROTOS – from ancient Greek, THE FIRST – is the first integral protective helmet of its kind. The more than 12 year development process aimed at integrating ear, face and neck protection, with a chinstrap and rear ventilation between the inner and outer shell.
• Fits perfectly even when working in sloping or overhead positions
• Hearing and face protection are integrated into the shell of the head protection to prevent snagging on branches
• Allows the cooling air to flow in from all sides and to escape through the ventilation gate
• Can be adjusted with only two fingers
PROTOS – from ancient Greek, THE FIRST – is the first integral protective helmet of its kind. The more than 12 year development process aimed at integrating ear, face and neck protection, with a chinstrap and rear ventilation between the inner and outer shell.
• Fits perfectly even when working in sloping or overhead positions
• Hearing and face protection are integrated into the shell of the head protection to prevent snagging on branches
• Allows the cooling air to flow in from all sides and to escape through the ventilation gate
• Can be adjusted with only two fingers
PROTOS – from ancient Greek, THE FIRST – is the first integral protective helmet of its kind. The more than 12 year development process aimed at integrating ear, face and neck protection, with a chinstrap and rear ventilation between the inner and outer shell.
• Fits perfectly even when working in sloping or overhead positions
• Hearing and face protection are integrated into the shell of the head protection to prevent snagging on branches
• Allows the cooling air to flow in from all sides and to escape through the ventilation gate
• Can be adjusted with only two fingers
.jpg)
.jpg)