Chainsaw Pants and Shirts
Designed with a classic denim look in mind, these jeans not only look good but have the hidden benefit of chainsaw protection. Lightweight yet tough, Denims are constructed with a durable abrasion resistant blend with stretch for easier movement. Certified by Underwriters Laboratories (UL) to ASTM F1897-20 for USA and meets OSHA regulation 1910-266.
Available in Small, Medium, and Large sizes. All standard size pants have an additional 2": length to allow for kneeling and bending. These pants do not have an elasticized waist so they tend to run small compated to other chainsaw pants.
| SIZE | WAIST | INSEAM |
| Small | up to 34" | 31" |
| Medium | up to 36" | 32" |
| Large | up to 39" | 32" |
FEATURES:
• Uses Arrestex HP advanced chainsaw protection material which is light
• Lightweight design, just 2 lbs 3 oz (Medium)
• Outer is constructed with an advanced stretch-woven fabric made from cotton, nylon and stretch polyester fibers that delivers an extremely high level of durability and light stretch without sacrificing structure
• Classic Denim pocket styling with 2 front, 2 back and a zipped phone pocket on the leg
• Opening in bottom hem of both legs for removal of debris
• Extra large belt loops to fit a 2 inch belt
• Straight jean cut with regular fit through hip and thigh and straight through the leg
Designed with a classic denim look in mind, these jeans not only look good but have the hidden benefit of chainsaw protection. Lightweight yet tough, Denims are constructed with a durable abrasion resistant blend with stretch for easier movement. Certified by Underwriters Laboratories (UL) to ASTM F1897-20 for USA and meets OSHA regulation 1910-266.
Available in Small, Medium, and Large sizes. All standard size pants have an additional 2": length to allow for kneeling and bending. These pants do not have an elasticized waist so they tend to run small compated to other chainsaw pants.
| SIZE | WAIST | INSEAM |
| Small | up to 34" | 31" |
| Medium | up to 36" | 32" |
| Large | up to 39" | 32" |
FEATURES:
• Uses Arrestex HP advanced chainsaw protection material which is light
• Lightweight design, just 2 lbs 3 oz (Medium)
• Outer is constructed with an advanced stretch-woven fabric made from cotton, nylon and stretch polyester fibers that delivers an extremely high level of durability and light stretch without sacrificing structure
• Classic Denim pocket styling with 2 front, 2 back and a zipped phone pocket on the leg
• Opening in bottom hem of both legs for removal of debris
• Extra large belt loops to fit a 2 inch belt
• Straight jean cut with regular fit through hip and thigh and straight through the leg
Designed with a classic denim look in mind, these jeans not only look good but have the hidden benefit of chainsaw protection. Lightweight yet tough, Denims are constructed with a durable abrasion resistant blend with stretch for easier movement. Certified by Underwriters Laboratories (UL) to ASTM F1897-20 for USA and meets OSHA regulation 1910-266.
Available in Small, Medium, and Large sizes. All standard size pants have an additional 2": length to allow for kneeling and bending. These pants do not have an elasticized waist so they tend to run small compated to other chainsaw pants.
| SIZE | WAIST | INSEAM |
| Small | up to 34" | 31" |
| Medium | up to 36" | 32" |
| Large | up to 39" | 32" |
FEATURES:
• Uses Arrestex HP advanced chainsaw protection material which is light
• Lightweight design, just 2 lbs 3 oz (Medium)
• Outer is constructed with an advanced stretch-woven fabric made from cotton, nylon and stretch polyester fibers that delivers an extremely high level of durability and light stretch without sacrificing structure
• Classic Denim pocket styling with 2 front, 2 back and a zipped phone pocket on the leg
• Opening in bottom hem of both legs for removal of debris
• Extra large belt loops to fit a 2 inch belt
• Straight jean cut with regular fit through hip and thigh and straight through the leg
Also available in small and large sizes
Fits waist size 34-36Clogger’s new, lightweight, GEN2 verison of the Zero arborist chainsaw pants. Cool, light and durable-chainsaw pants that weigh less than 2.2 lbs are cooler and more durable but are still fully certified as chainsaw protective apparel. FEATURES: • UV protective outer fabric, engineered to lower body temperature by dispersing body heat through breathability and the use of Nilit® Breeze yarn – Nilit® is proven to reduce body temperature • 4-way stretch fabric for greater freedom of movement and flexibility with elasticized thread in the seat for extra give • More high-tenacity nylon and a ripstop weave for a 1.5x stronger outer abrasion resistant fabric over the knee, the inside of the calf and ankle areas increasing the durability in these high wear areas. • Ultra-high tear strength Dyneema® fabric at the right calf to protect against small cuts caused by the chainsaw, when hanging off the harness • Elasticized waist for a snug fit & extra comfort • Wide belt loops to fit up to 50mm (2 inch) belt • Stronger and more durable zippers with a better seal to reduce sawdust damage • Two zipped hip pockets; two zipped thigh pockets individually sewn to be able to remove saw dust, additional pocket on the left thigh, all accessible while wearing a harness • High-vis panels front and rear • Tough, mesh and large cooling vents at rear of both legs for ventilation • Lace hooks to prevent the pants from riding up • Slim fit with a just the right amount of fabric for easily movement
Also available in small and medium sizes
Fits waist size 36-38.
Clogger’s new, lightweight, GEN2 verison of the Zero arborist chainsaw pants. Cool, light and durable-chainsaw pants that weigh less than 2.2 lbs are cooler and more durable but are still fully certified as chainsaw protective apparel.
FEATURES:
• UV protective outer fabric, engineered to lower body temperature by dispersing body heat through breathability and the use of Nilit® Breeze yarn – Nilit® is proven to reduce body temperature
• 4-way stretch fabric for greater freedom of movement and flexibility with elasticized thread in the seat for extra give
• More high-tenacity nylon and a ripstop weave for a 1.5x stronger outer abrasion resistant fabric over the knee, the inside of the calf and ankle areas increasing the durability in these high wear areas.
• Ultra-high tear strength Dyneema® fabric at the right calf to protect against small cuts caused by the chainsaw, when hanging off the harness
• Elasticized waist for a snug fit & extra comfort
• Wide belt loops to fit up to 50mm (2 inch) belt
• Stronger and more durable zippers with a better seal to reduce sawdust damage
• Two zipped hip pockets; two zipped thigh pockets individually sewn to be able to remove saw dust, additional pocket on the left thigh, all accessible while wearing a harness
• High-vis panels front and rear
• Tough, mesh and large cooling vents at rear of both legs for ventilation
• Lace hooks to prevent the pants from riding up
• Slim fit with a just the right amount of fabric for easily movement
Also available in medium and large sizes
Fits waist size 32-24.Clogger’s new, lightweight, GEN2 verison of the Zero arborist chainsaw pants. Cool, light and durable-chainsaw pants that weigh less than 2.2 lbs are cooler and more durable but are still fully certified as chainsaw protective apparel. FEATURES: • UV protective outer fabric, engineered to lower body temperature by dispersing body heat through breathability and the use of Nilit® Breeze yarn – Nilit® is proven to reduce body temperature • 4-way stretch fabric for greater freedom of movement and flexibility with elasticized thread in the seat for extra give • More high-tenacity nylon and a ripstop weave for a 1.5x stronger outer abrasion resistant fabric over the knee, the inside of the calf and ankle areas increasing the durability in these high wear areas. • Ultra-high tear strength Dyneema® fabric at the right calf to protect against small cuts caused by the chainsaw, when hanging off the harness • Elasticized waist for a snug fit & extra comfort • Wide belt loops to fit up to 50mm (2 inch) belt • Stronger and more durable zippers with a better seal to reduce sawdust damage • Two zipped hip pockets; two zipped thigh pockets individually sewn to be able to remove saw dust, additional pocket on the left thigh, all accessible while wearing a harness • High-vis panels front and rear • Tough, mesh and large cooling vents at rear of both legs for ventilation • Lace hooks to prevent the pants from riding up • Slim fit with a just the right amount of fabric for easily movement
Features include:
• Certified chainsaw protective pant with 5 layers of protection that meets ASTM F1897 (US), ANSI Z133.1, and UL® Certified, OSHA standards.
• Durable material to hold up in various conditions
• Ventilation on back of legs for breathability
• Light weight design for all day comfort
• Reflective Husqvarna logo for high visibility
• Reinforced knees
• True fit sizing- Fits waist 36"-40".
Features include:
• Certified chainsaw protective pant with 5 layers of protection that meets ASTM F1897 (US), ANSI Z133.1, and UL® Certified, OSHA standards.
• Durable material to hold up in various conditions
• Ventilation on back of legs for breathability
• Light weight design for all day comfort
• Reflective Husqvarna logo for high visibility
• Reinforced knees
• True fit sizing- Fits waist 30"-34".
Features include:
• Certified chainsaw protective pant with 5 layers of protection that meets ASTM F1897 (US), ANSI Z133.1, and UL® Certified, OSHA standards.
• Durable material to hold up in various conditions
• Ventilation on back of legs for breathability
• Light weight design for all day comfort
• Reflective Husqvarna logo for high visibility
• Reinforced knees
• True fit sizing- Fits waist 28"-32".
Special Order - Please allow 5-7 days.
The top of the orange hi-vis Swedepro chainsaw protective shirt is made with Visa® Polyester material for flexibility and the body is made with Polyester mesh for breathability and comfort.
Protective pad is constructed from EngtexTM material.
The shirt has protective material sewn into the sleeve, collar, and shoulder areas. Comes in a range of size from Medium to XL. Please specify size when ordering.
Special Order - Please allow 7-10 days.
Six layer chain saw protective pants from Gransford-Bruks that can be worn all day just like regular pants and are machine washable. Outer shell front is made with Ambush® material for durability and back is made with breathable Visa® Polyester for flexibility and comfort. Protective pad made with Engtex® material.
A ski style leg zipper makes taking off your boots a breeze. Designed with articulated knees that reduce pull at the waist when you bend and stoop which keeps the pants from riding up. Five pockets and a cargo pocket on left leg panel.
Conforms to OHSHA regulations and UL® classified. ASTM F1897, ANSI Z133.1 and UL Classified.
Available in the following sizes: Small (30"-32") Medium (34"-36") Large (38"-40") X-Large (42"-44")
Special Order - Please allow 7-10 days.
Same construction and quality of the summer chainsaw pants but with a layer of Thinsulate added for extra warmth.
Available in the following sizes: Small (30"-32") Medium (34"-36") Large (38"-40") X-Large (42"-44")
.jpg)
.jpg)