Lowering Devices
SPECIAL ORDER - ALLOW 7-10 DAYS FOR ORDER
Heavy duty lowering bollard of galvanized steel construction for use with 10mm-14mm (7/16"-9/16") diameter rope. Replaceable rubber insert for tree protection when strapped to trunk. Includes 2 heavy duty ratchet straps to attach the bollard to the tree and comes in reinforced PVC carry bag.
MWL: 15kN
MBS: 45kN
WLL: 3300 lbs.
The Port-A-Wrap III has a versatile rope retention, lifting and anchoring system. Working load of 2000 lbs. and uses up to 3/4" rope. Made in the USA of nickel plated steel.
| Shipping Weight : | 8 lbs. |
SPECIAL ORDER-SHIPS WITHIN 10 DAYS
New from Buckingham, the Port-A-Wrap XL has a versatile rope retention, lifting and 3-1/2" diameter barrel anchoring system. Tensile strength of 60,000 lbs. and an average working load of 6,000 lbs. Accepts 7/8" and 1" rope. Made in the USA of nickel plated steel. Ideal for those large take-downs./p>
SPECIAL ORDER-SHIPS WITHIN 5-7 DAYS
The large rigging hub from DMM features four kidney shaped slots, a super strong central eye and four smaller clipping eyes that give numerous options for complex rigging. The hub features textile friendly connection points suitable for rope, webbing and opposed connectors. Central hole can accommodate a running rope and facilitates 3D rigging.Super high breaking strength of 45kN (outer kidney slots) and 150kN (central eye). CNC machined from top grade alloy for strength, durability and lightness, anodized to BS EN 7599:2010 AA10 and sealed for corrosion protection
Two fiddle blocks and 50 feet of 1/2" rope with a 5-1 mechanical advantage, and 12 foot of take up. The rope is Teufelberger Hi-vee Safety Blue Braid-(7,000 lbs. tensile strength). Upper block has a beckett for rope stopping.
Both blocks have attachments for carabiners (sold separately).
Allow 3-5 days for delivery-Ships direct from manufacturer
This friction brake is really the top of the line in rigging devicces. It can be used in several time saving ways; rigging, lowering, raising or pulling, pulling a load from the side, and as a rope brake.
The GRCS has two settings, providing a 44:1 and a 22:1 mechanical advantage, and two specialized spools: one for lowering and one for lifting and has a dead lift rating of 3,000 lbs.
A truck mount adapter can be purchased separately.
| Shipping Weight : | 75 lbs. |
SPECIAL ORDER-SHIPS WITHIN 5-7 DAYS
The CMI Rope Jack is a Mechanical Advantage tool for pre-tensioning static lines, light lifting and cabling. The Rope Jack is small enough and light enough to be carried aloft by a climber for Mechanical Advantage within the crown. The length of the handle on the Rope Jack limits excessive loading to avoid rope damage.The MA is approximately 5:1 - no pulleys, no extra rope, minimum weight, minimum friction, quick, easy on-off, works well 'topside', too. The CMI Rope Jack is used to remove slack & stretch for lowering and to lift the tips on light limbs without having to break out the big guns.
To remove a load from the Rope Jack, pull the handle and allow the trailing cam to loosen, then pull handle again and allow the forward cam to loosen. Releasing the Rope Jack will take a little practice. The Rope Jack should be relieved from tension a little bit at a time off each cam.
.jpg)
.jpg)